Using gmake

I was advised at http://www.linux.org.ru/forum/admin/8726100?lastmod=1358421944338#comment-8731504 to use gmake instead of make to install openssh . Installing openssh takes place in 3 steps:

 ./configure make make install 

So, I accordingly had a question: what do I need besides installing gmake to additionally use gmake when installing openssh , namely whether it is necessary to change make in gmake in the 3 commands listed above (I don’t know how gnu make is called - by command make or gmake ), do you need to set the path to gmake in $PATH ? And if you need to use the make to invoke gmake when installing openssh , how will linux determine whether I am invoking an old make program or a new installed gnu make ?

PS @avp here /volumes/openssh-6.1p1/Makefile

 # $Id: Makefile.in,v 1.326 2012/04/04 01:27:57 djm Exp $ # uncomment if you run a non bourne compatable shell. Ie. csh #SHELL = /usr/gnu/bin/sh AUTORECONF=autoreconf prefix=/usr/local exec_prefix=${prefix} bindir=${exec_prefix}/bin sbindir=${exec_prefix}/sbin libexecdir=${exec_prefix}/libexec datadir=${datarootdir} datarootdir=${prefix}/share mandir=${datarootdir}/man mansubdir=man sysconfdir=${prefix}/etc piddir=/var/run srcdir=. top_srcdir=. DESTDIR= SSH_PROGRAM=${exec_prefix}/bin/ssh ASKPASS_PROGRAM=$(libexecdir)/ssh-askpass SFTP_SERVER=$(libexecdir)/sftp-server SSH_KEYSIGN=$(libexecdir)/ssh-keysign SSH_PKCS11_HELPER=$(libexecdir)/ssh-pkcs11-helper PRIVSEP_PATH=/var/empty SSH_PRIVSEP_USER=sshd STRIP_OPT=-s PATHS= -DSSHDIR=\"$(sysconfdir)\" \ -D_PATH_SSH_PROGRAM=\"$(SSH_PROGRAM)\" \ -D_PATH_SSH_ASKPASS_DEFAULT=\"$(ASKPASS_PROGRAM)\" \ -D_PATH_SFTP_SERVER=\"$(SFTP_SERVER)\" \ -D_PATH_SSH_KEY_SIGN=\"$(SSH_KEYSIGN)\" \ -D_PATH_SSH_PKCS11_HELPER=\"$(SSH_PKCS11_HELPER)\" \ -D_PATH_SSH_PIDDIR=\"$(piddir)\" \ -D_PATH_PRIVSEP_CHROOT_DIR=\"$(PRIVSEP_PATH)\" \ CC=gcc LD=gcc CFLAGS=-g -O2 -Wall -Wpointer-arith -Wuninitialized -Wsign-compare -Wformat-security -Wno-pointer-sign -fno-strict-aliasing -D_FORTIFY_SOURCE=2 -fno-builtin-memset -fstack-protector-all CPPFLAGS=-I. -I$(srcdir) $(PATHS) -DHAVE_CONFIG_H LIBS=-lresolv -lcrypto -lz -lsocket -lnsl SSHLIBS= SSHDLIBS= LIBEDIT= AR=/usr/gnu/bin/ar AWK=nawk RANLIB=ranlib INSTALL=/usr/gnu/bin/install -c PERL=/usr/bin/perl SED=/usr/gnu/bin/sed ENT= XAUTH_PATH=undefined LDFLAGS=-L. -Lopenbsd-compat/ -fstack-protector-all EXEEXT= MANFMT=/usr/gnu/bin/nroff -mandoc TARGETS=ssh$(EXEEXT) sshd$(EXEEXT) ssh-add$(EXEEXT) ssh-keygen$(EXEEXT) ssh-keyscan${EXEEXT} ssh-keysign${EXEEXT} ssh-pkcs11-helper$(EXEEXT) ssh-agent$(EXEEXT) scp$(EXEEXT) sftp-server$(EXEEXT) sftp$(EXEEXT) LIBSSH_OBJS=acss.o authfd.o authfile.o bufaux.o bufbn.o buffer.o \ canohost.o channels.o cipher.o cipher-acss.o cipher-aes.o \ cipher-bf1.o cipher-ctr.o cipher-3des1.o cleanup.o \ compat.o compress.o crc32.o deattack.o fatal.o hostfile.o \ log.o match.o md-sha256.o moduli.o nchan.o packet.o \ readpass.o rsa.o ttymodes.o xmalloc.o addrmatch.o \ atomicio.o key.o dispatch.o kex.o mac.o uidswap.o uuencode.o misc.o \ monitor_fdpass.o rijndael.o ssh-dss.o ssh-ecdsa.o ssh-rsa.o dh.o \ kexdh.o kexgex.o kexdhc.o kexgexc.o bufec.o kexecdh.o kexecdhc.o \ msg.o progressmeter.o dns.o entropy.o gss-genr.o umac.o jpake.o \ schnorr.o ssh-pkcs11.o SSHOBJS= ssh.o readconf.o clientloop.o sshtty.o \ sshconnect.o sshconnect1.o sshconnect2.o mux.o \ roaming_common.o roaming_client.o SSHDOBJS=sshd.o auth-rhosts.o auth-passwd.o auth-rsa.o auth-rh-rsa.o \ audit.o audit-bsm.o audit-linux.o platform.o \ sshpty.o sshlogin.o servconf.o serverloop.o \ auth.o auth1.o auth2.o auth-options.o session.o \ auth-chall.o auth2-chall.o groupaccess.o \ auth-skey.o auth-bsdauth.o auth2-hostbased.o auth2-kbdint.o \ auth2-none.o auth2-passwd.o auth2-pubkey.o auth2-jpake.o \ monitor_mm.o monitor.o monitor_wrap.o kexdhs.o kexgexs.o kexecdhs.o \ auth-krb5.o \ auth2-gss.o gss-serv.o gss-serv-krb5.o \ loginrec.o auth-pam.o auth-shadow.o auth-sia.o md5crypt.o \ sftp-server.o sftp-common.o \ roaming_common.o roaming_serv.o \ sandbox-null.o sandbox-rlimit.o sandbox-systrace.o sandbox-darwin.o \ sandbox-seccomp-filter.o MANPAGES = moduli.5.out scp.1.out ssh-add.1.out ssh-agent.1.out ssh-keygen.1.out ssh-keyscan.1.out ssh.1.out sshd.8.out sftp-server.8.out sftp.1.out ssh-keysign.8.out ssh-pkcs11-helper.8.out sshd_config.5.out ssh_config.5.out MANPAGES_IN = moduli.5 scp.1 ssh-add.1 ssh-agent.1 ssh-keygen.1 ssh-keyscan.1 ssh.1 sshd.8 sftp-server.8 sftp.1 ssh-keysign.8 ssh-pkcs11-helper.8 sshd_config.5 ssh_config.5 MANTYPE = doc CONFIGFILES=sshd_config.out ssh_config.out moduli.out CONFIGFILES_IN=sshd_config ssh_config moduli PATHSUBS = \ -e 's|/etc/ssh/ssh_config|$(sysconfdir)/ssh_config|g' \ -e 's|/etc/ssh/ssh_known_hosts|$(sysconfdir)/ssh_known_hosts|g' \ -e 's|/etc/ssh/sshd_config|$(sysconfdir)/sshd_config|g' \ -e 's|/usr/libexec|$(libexecdir)|g' \ -e 's|/etc/shosts.equiv|$(sysconfdir)/shosts.equiv|g' \ -e 's|/etc/ssh/ssh_host_key|$(sysconfdir)/ssh_host_key|g' \ -e 's|/etc/ssh/ssh_host_ecdsa_key|$(sysconfdir)/ssh_host_ecdsa_key|g' \ -e 's|/etc/ssh/ssh_host_dsa_key|$(sysconfdir)/ssh_host_dsa_key|g' \ -e 's|/etc/ssh/ssh_host_rsa_key|$(sysconfdir)/ssh_host_rsa_key|g' \ -e 's|/var/run/sshd.pid|$(piddir)/sshd.pid|g' \ -e 's|/etc/moduli|$(sysconfdir)/moduli|g' \ -e 's|/etc/ssh/moduli|$(sysconfdir)/moduli|g' \ -e 's|/etc/ssh/sshrc|$(sysconfdir)/sshrc|g' \ -e 's|/usr/X11R6/bin/xauth|$(XAUTH_PATH)|g' \ -e 's|/var/empty|$(PRIVSEP_PATH)|g' \ -e 's|/usr/bin:/bin:/usr/sbin:/sbin|/usr/ccs/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin|g' FIXPATHSCMD = $(SED) $(PATHSUBS) all: $(CONFIGFILES) $(MANPAGES) $(TARGETS) $(LIBSSH_OBJS): Makefile.in config.h $(SSHOBJS): Makefile.in config.h $(SSHDOBJS): Makefile.in config.h .co: $(CC) $(CFLAGS) $(CPPFLAGS) -c $< LIBCOMPAT=openbsd-compat/libopenbsd-compat.a $(LIBCOMPAT): always (cd openbsd-compat && $(MAKE)) always: libssh.a: $(LIBSSH_OBJS) $(AR) rv $@ $(LIBSSH_OBJS) $(RANLIB) $@ ssh$(EXEEXT): $(LIBCOMPAT) libssh.a $(SSHOBJS) $(LD) -o $@ $(SSHOBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(SSHLIBS) $(LIBS) sshd$(EXEEXT): libssh.a $(LIBCOMPAT) $(SSHDOBJS) $(LD) -o $@ $(SSHDOBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(SSHDLIBS) $(LIBS) scp$(EXEEXT): $(LIBCOMPAT) libssh.a scp.o progressmeter.o $(LD) -o $@ scp.o progressmeter.o bufaux.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) ssh-add$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-add.o $(LD) -o $@ ssh-add.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) ssh-agent$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-agent.o ssh-pkcs11-client.o $(LD) -o $@ ssh-agent.o ssh-pkcs11-client.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) ssh-keygen$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keygen.o $(LD) -o $@ ssh-keygen.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) ssh-keysign$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keysign.o roaming_dummy.o readconf.o $(LD) -o $@ ssh-keysign.o readconf.o roaming_dummy.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) ssh-pkcs11-helper$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-pkcs11-helper.o ssh-pkcs11.o $(LD) -o $@ ssh-pkcs11-helper.o ssh-pkcs11.o $(LDFLAGS) -lssh -lopenbsd-compat -lssh -lopenbsd-compat $(LIBS) ssh-keyscan$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keyscan.o roaming_dummy.o $(LD) -o $@ ssh-keyscan.o roaming_dummy.o $(LDFLAGS) -lssh -lopenbsd-compat -lssh $(LIBS) sftp-server$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-common.o sftp-server.o sftp-server-main.o $(LD) -o $@ sftp-server.o sftp-common.o sftp-server-main.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) sftp$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-client.o sftp-common.o sftp-glob.o progressmeter.o $(LD) -o $@ progressmeter.o sftp.o sftp-client.o sftp-common.o sftp-glob.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) $(LIBEDIT) # test driver for the loginrec code - not built by default logintest: logintest.o $(LIBCOMPAT) libssh.a loginrec.o $(LD) -o $@ logintest.o $(LDFLAGS) loginrec.o -lopenbsd-compat -lssh $(LIBS) $(MANPAGES): $(MANPAGES_IN) if test "$(MANTYPE)" = "cat"; then \ manpage=$(srcdir)/`echo $@ | sed 's/\.[1-9]\.out$$/\.0/'`; \ else \ manpage=$(srcdir)/`echo $@ | sed 's/\.out$$//'`; \ fi; \ if test "$(MANTYPE)" = "man"; then \ $(FIXPATHSCMD) $${manpage} | $(AWK) -f $(srcdir)/mdoc2man.awk > $@; \ else \ $(FIXPATHSCMD) $${manpage} > $@; \ fi $(CONFIGFILES): $(CONFIGFILES_IN) conffile=`echo $@ | sed 's/.out$$//'`; \ $(FIXPATHSCMD) $(srcdir)/$${conffile} > $@ # fake rule to stop make trying to compile moduli.o into a binary "moduli.o" moduli: echo clean: regressclean rm -f *.o *.a $(TARGETS) logintest config.cache config.log rm -f *.out core survey (cd openbsd-compat && $(MAKE) clean) distclean: regressclean rm -f *.o *.a $(TARGETS) logintest config.cache config.log rm -f *.out core opensshd.init openssh.xml rm -f Makefile buildpkg.sh config.h config.status rm -f survey.sh openbsd-compat/regress/Makefile *~ rm -rf autom4te.cache (cd openbsd-compat && $(MAKE) distclean) if test -d pkg ; then \ rm -fr pkg ; \ fi veryclean: distclean rm -f configure config.h.in *.0 cleandir: veryclean mrproper: veryclean realclean: veryclean catman-do: @for f in $(MANPAGES_IN) ; do \ base=`echo $$f | sed 's/\..*$$//'` ; \ echo "$$f -> $$base.0" ; \ $(MANFMT) $$f | cat -v | sed -e 's/.\^H//g' \ >$$base.0 ; \ done distprep: catman-do $(AUTORECONF) -rm -rf autom4te.cache install: $(CONFIGFILES) $(MANPAGES) $(TARGETS) install-files install-sysconf host-key check-config install-nokeys: $(CONFIGFILES) $(MANPAGES) $(TARGETS) install-files install-sysconf install-nosysconf: $(CONFIGFILES) $(MANPAGES) $(TARGETS) install-files check-config: -$(DESTDIR)$(sbindir)/sshd -t -f $(DESTDIR)$(sysconfdir)/sshd_config install-files: $(srcdir)/mkinstalldirs $(DESTDIR)$(bindir) $(srcdir)/mkinstalldirs $(DESTDIR)$(sbindir) $(srcdir)/mkinstalldirs $(DESTDIR)$(mandir) $(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)/$(mansubdir)1 $(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)/$(mansubdir)5 $(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)/$(mansubdir)8 $(srcdir)/mkinstalldirs $(DESTDIR)$(libexecdir) (umask 022 ; $(srcdir)/mkinstalldirs $(DESTDIR)$(PRIVSEP_PATH)) $(INSTALL) -m 0755 $(STRIP_OPT) ssh$(EXEEXT) $(DESTDIR)$(bindir)/ssh$(EXEEXT) $(INSTALL) -m 0755 $(STRIP_OPT) scp$(EXEEXT) $(DESTDIR)$(bindir)/scp$(EXEEXT) $(INSTALL) -m 0755 $(STRIP_OPT) ssh-add$(EXEEXT) $(DESTDIR)$(bindir)/ssh-add$(EXEEXT) $(INSTALL) -m 0755 $(STRIP_OPT) ssh-agent$(EXEEXT) $(DESTDIR)$(bindir)/ssh-agent$(EXEEXT) $(INSTALL) -m 0755 $(STRIP_OPT) ssh-keygen$(EXEEXT) $(DESTDIR)$(bindir)/ssh-keygen$(EXEEXT) $(INSTALL) -m 0755 $(STRIP_OPT) ssh-keyscan$(EXEEXT) $(DESTDIR)$(bindir)/ssh-keyscan$(EXEEXT) $(INSTALL) -m 0755 $(STRIP_OPT) sshd$(EXEEXT) $(DESTDIR)$(sbindir)/sshd$(EXEEXT) $(INSTALL) -m 4711 $(STRIP_OPT) ssh-keysign$(EXEEXT) $(DESTDIR)$(SSH_KEYSIGN)$(EXEEXT) $(INSTALL) -m 0755 $(STRIP_OPT) ssh-pkcs11-helper$(EXEEXT) $(DESTDIR)$(SSH_PKCS11_HELPER)$(EXEEXT) $(INSTALL) -m 0755 $(STRIP_OPT) sftp$(EXEEXT) $(DESTDIR)$(bindir)/sftp$(EXEEXT) $(INSTALL) -m 0755 $(STRIP_OPT) sftp-server$(EXEEXT) $(DESTDIR)$(SFTP_SERVER)$(EXEEXT) $(INSTALL) -m 644 ssh.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh.1 $(INSTALL) -m 644 scp.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/scp.1 $(INSTALL) -m 644 ssh-add.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-add.1 $(INSTALL) -m 644 ssh-agent.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-agent.1 $(INSTALL) -m 644 ssh-keygen.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keygen.1 $(INSTALL) -m 644 ssh-keyscan.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keyscan.1 $(INSTALL) -m 644 moduli.5.out $(DESTDIR)$(mandir)/$(mansubdir)5/moduli.5 $(INSTALL) -m 644 sshd_config.5.out $(DESTDIR)$(mandir)/$(mansubdir)5/sshd_config.5 $(INSTALL) -m 644 ssh_config.5.out $(DESTDIR)$(mandir)/$(mansubdir)5/ssh_config.5 $(INSTALL) -m 644 sshd.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/sshd.8 $(INSTALL) -m 644 sftp.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/sftp.1 $(INSTALL) -m 644 sftp-server.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/sftp-server.8 $(INSTALL) -m 644 ssh-keysign.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-keysign.8 $(INSTALL) -m 644 ssh-pkcs11-helper.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-pkcs11-helper.8 -rm -f $(DESTDIR)$(bindir)/slogin ln -s ./ssh$(EXEEXT) $(DESTDIR)$(bindir)/slogin -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1 ln -s ./ssh.1 $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1 install-sysconf: if [ ! -d $(DESTDIR)$(sysconfdir) ]; then \ $(srcdir)/mkinstalldirs $(DESTDIR)$(sysconfdir); \ fi @if [ ! -f $(DESTDIR)$(sysconfdir)/ssh_config ]; then \ $(INSTALL) -m 644 ssh_config.out $(DESTDIR)$(sysconfdir)/ssh_config; \ else \ echo "$(DESTDIR)$(sysconfdir)/ssh_config already exists, install will not overwrite"; \ fi @if [ ! -f $(DESTDIR)$(sysconfdir)/sshd_config ]; then \ $(INSTALL) -m 644 sshd_config.out $(DESTDIR)$(sysconfdir)/sshd_config; \ else \ echo "$(DESTDIR)$(sysconfdir)/sshd_config already exists, install will not overwrite"; \ fi @if [ ! -f $(DESTDIR)$(sysconfdir)/moduli ]; then \ if [ -f $(DESTDIR)$(sysconfdir)/primes ]; then \ echo "moving $(DESTDIR)$(sysconfdir)/primes to $(DESTDIR)$(sysconfdir)/moduli"; \ mv "$(DESTDIR)$(sysconfdir)/primes" "$(DESTDIR)$(sysconfdir)/moduli"; \ else \ $(INSTALL) -m 644 moduli.out $(DESTDIR)$(sysconfdir)/moduli; \ fi ; \ else \ echo "$(DESTDIR)$(sysconfdir)/moduli already exists, install will not overwrite"; \ fi host-key: ssh-keygen$(EXEEXT) @if [ -z "$(DESTDIR)" ] ; then \ if [ -f "$(sysconfdir)/ssh_host_key" ] ; then \ echo "$(sysconfdir)/ssh_host_key already exists, skipping." ; \ else \ ./ssh-keygen -t rsa1 -f $(sysconfdir)/ssh_host_key -N "" ; \ fi ; \ if [ -f $(sysconfdir)/ssh_host_dsa_key ] ; then \ echo "$(sysconfdir)/ssh_host_dsa_key already exists, skipping." ; \ else \ ./ssh-keygen -t dsa -f $(sysconfdir)/ssh_host_dsa_key -N "" ; \ fi ; \ if [ -f $(sysconfdir)/ssh_host_rsa_key ] ; then \ echo "$(sysconfdir)/ssh_host_rsa_key already exists, skipping." ; \ else \ ./ssh-keygen -t rsa -f $(sysconfdir)/ssh_host_rsa_key -N "" ; \ fi ; \ if [ -z "#no ecc#" ] ; then \ if [ -f $(sysconfdir)/ssh_host_ecdsa_key ] ; then \ echo "$(sysconfdir)/ssh_host_ecdsa_key already exists, skipping." ; \ else \ ./ssh-keygen -t ecdsa -f $(sysconfdir)/ssh_host_ecdsa_key -N "" ; \ fi ; \ fi ; \ fi ; host-key-force: ssh-keygen$(EXEEXT) ./ssh-keygen -t rsa1 -f $(DESTDIR)$(sysconfdir)/ssh_host_key -N "" ./ssh-keygen -t dsa -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key -N "" ./ssh-keygen -t rsa -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key -N "" test -z "#no ecc#" && ./ssh-keygen -t ecdsa -f $(DESTDIR)$(sysconfdir)/ssh_host_ecdsa_key -N "" uninstallall: uninstall -rm -f $(DESTDIR)$(sysconfdir)/ssh_config -rm -f $(DESTDIR)$(sysconfdir)/sshd_config -rmdir $(DESTDIR)$(sysconfdir) -rmdir $(DESTDIR)$(bindir) -rmdir $(DESTDIR)$(sbindir) -rmdir $(DESTDIR)$(mandir)/$(mansubdir)1 -rmdir $(DESTDIR)$(mandir)/$(mansubdir)8 -rmdir $(DESTDIR)$(mandir) -rmdir $(DESTDIR)$(libexecdir) uninstall: -rm -f $(DESTDIR)$(bindir)/slogin -rm -f $(DESTDIR)$(bindir)/ssh$(EXEEXT) -rm -f $(DESTDIR)$(bindir)/scp$(EXEEXT) -rm -f $(DESTDIR)$(bindir)/ssh-add$(EXEEXT) -rm -f $(DESTDIR)$(bindir)/ssh-agent$(EXEEXT) -rm -f $(DESTDIR)$(bindir)/ssh-keygen$(EXEEXT) -rm -f $(DESTDIR)$(bindir)/ssh-keyscan$(EXEEXT) -rm -f $(DESTDIR)$(bindir)/sftp$(EXEEXT) -rm -f $(DESTDIR)$(sbindir)/sshd$(EXEEXT) -rm -r $(DESTDIR)$(SFTP_SERVER)$(EXEEXT) -rm -f $(DESTDIR)$(SSH_KEYSIGN)$(EXEEXT) -rm -f $(DESTDIR)$(SSH_PKCS11_HELPER)$(EXEEXT) -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh.1 -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/scp.1 -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-add.1 -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-agent.1 -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keygen.1 -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/sftp.1 -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keyscan.1 -rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/sshd.8 -rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/sftp-server.8 -rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-keysign.8 -rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-pkcs11-helper.8 -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1 tests interop-tests: $(TARGETS) BUILDDIR=`pwd`; \ [ -d `pwd`/regress ] || mkdir -p `pwd`/regress; \ [ -f `pwd`/regress/Makefile ] || \ ln -s `cd $(srcdir) && pwd`/regress/Makefile `pwd`/regress/Makefile ; \ TEST_SHELL="sh"; \ TEST_SSH_SSH="$${BUILDDIR}/ssh"; \ TEST_SSH_SSHD="$${BUILDDIR}/sshd"; \ TEST_SSH_SSHAGENT="$${BUILDDIR}/ssh-agent"; \ TEST_SSH_SSHADD="$${BUILDDIR}/ssh-add"; \ TEST_SSH_SSHKEYGEN="$${BUILDDIR}/ssh-keygen"; \ TEST_SSH_SSHPKCS11HELPER="$${BUILDDIR}/ssh-pkcs11-helper"; \ TEST_SSH_SSHKEYSCAN="$${BUILDDIR}/ssh-keyscan"; \ TEST_SSH_SFTP="$${BUILDDIR}/sftp"; \ TEST_SSH_SFTPSERVER="$${BUILDDIR}/sftp-server"; \ TEST_SSH_PLINK="plink"; \ TEST_SSH_PUTTYGEN="puttygen"; \ TEST_SSH_CONCH="conch"; \ TEST_SSH_IPV6="yes" ; \ TEST_SSH_ECC="no" ; \ TEST_SSH_SHA256="yes" ; \ cd $(srcdir)/regress || exit $$?; \ $(MAKE) \ .OBJDIR="$${BUILDDIR}/regress" \ .CURDIR="`pwd`" \ BUILDDIR="$${BUILDDIR}" \ OBJ="$${BUILDDIR}/regress/" \ PATH="$${BUILDDIR}:$${PATH}" \ TEST_SHELL="$${TEST_SHELL}" \ TEST_SSH_SSH="$${TEST_SSH_SSH}" \ TEST_SSH_SSHD="$${TEST_SSH_SSHD}" \ TEST_SSH_SSHAGENT="$${TEST_SSH_SSHAGENT}" \ TEST_SSH_SSHADD="$${TEST_SSH_SSHADD}" \ TEST_SSH_SSHKEYGEN="$${TEST_SSH_SSHKEYGEN}" \ TEST_SSH_SSHPKCS11HELPER="$${TEST_SSH_SSHPKCS11HELPER}" \ TEST_SSH_SSHKEYSCAN="$${TEST_SSH_SSHKEYSCAN}" \ TEST_SSH_SFTP="$${TEST_SSH_SFTP}" \ TEST_SSH_SFTPSERVER="$${TEST_SSH_SFTPSERVER}" \ TEST_SSH_PLINK="$${TEST_SSH_PLINK}" \ TEST_SSH_PUTTYGEN="$${TEST_SSH_PUTTYGEN}" \ TEST_SSH_CONCH="$${TEST_SSH_CONCH}" \ TEST_SSH_IPV6="$${TEST_SSH_IPV6}" \ TEST_SSH_ECC="$${TEST_SSH_ECC}" \ TEST_SSH_SHA256="$${TEST_SSH_SHA256}" \ EXEEXT="$(EXEEXT)" \ $@ && echo all tests passed compat-tests: $(LIBCOMPAT) (cd openbsd-compat/regress && $(MAKE)) regressclean: if [ -f regress/Makefile ] && [ -r regress/Makefile ]; then \ (cd regress && $(MAKE) clean) \ fi survey: survey.sh ssh @$(SHELL) ./survey.sh > survey @echo 'The survey results have been placed in the file "survey" in the' @echo 'current directory. Please review the file then send with' @echo '"make send-survey".' send-survey: survey mail portable-survey@mindrot.org <survey package: $(CONFIGFILES) $(MANPAGES) $(TARGETS) if [ "yes" = yes ]; then \ sh buildpkg.sh; \ fi 

PS2. The @avp file /usr/local/etc/ssh_host_dsa_key and /usr/local/etc/ssh_host_dsa_key.pub have appeared. As a result of the re-run, make install issued

 (cd openbsd-compat && make) ./mkinstalldirs /usr/local/bin ./mkinstalldirs /usr/local/sbin ./mkinstalldirs /usr/local/share/man ./mkinstalldirs /usr/local/share/man/man1 ./mkinstalldirs /usr/local/share/man/man5 ./mkinstalldirs /usr/local/share/man/man8 ./mkinstalldirs /usr/local/libexec (umask 022 ; ./mkinstalldirs /var/empty) /usr/gnu/bin/install -c -m 0755 -s ssh /usr/local/bin/ssh /usr/gnu/bin/install -c -m 0755 -s scp /usr/local/bin/scp /usr/gnu/bin/install -c -m 0755 -s ssh-add /usr/local/bin/ssh-add /usr/gnu/bin/install -c -m 0755 -s ssh-agent /usr/local/bin/ssh-agent /usr/gnu/bin/install -c -m 0755 -s ssh-keygen /usr/local/bin/ssh-keygen /usr/gnu/bin/install -c -m 0755 -s ssh-keyscan /usr/local/bin/ssh-keyscan /usr/gnu/bin/install -c -m 0755 -s sshd /usr/local/sbin/sshd /usr/gnu/bin/install -c -m 4711 -s ssh-keysign /usr/local/libexec/ssh-keysign /usr/gnu/bin/install -c -m 0755 -s ssh-pkcs11-helper /usr/local/libexec/ssh-pkcs11-helper /usr/gnu/bin/install -c -m 0755 -s sftp /usr/local/bin/sftp /usr/gnu/bin/install -c -m 0755 -s sftp-server /usr/local/libexec/sftp-server /usr/gnu/bin/install -c -m 644 ssh.1.out /usr/local/share/man/man1/ssh.1 /usr/gnu/bin/install -c -m 644 scp.1.out /usr/local/share/man/man1/scp.1 /usr/gnu/bin/install -c -m 644 ssh-add.1.out /usr/local/share/man/man1/ssh-add.1 /usr/gnu/bin/install -c -m 644 ssh-agent.1.out /usr/local/share/man/man1/ssh-agent.1 /usr/gnu/bin/install -c -m 644 ssh-keygen.1.out /usr/local/share/man/man1/ssh-keygen.1 /usr/gnu/bin/install -c -m 644 ssh-keyscan.1.out /usr/local/share/man/man1/ssh-keyscan.1 /usr/gnu/bin/install -c -m 644 moduli.5.out /usr/local/share/man/man5/moduli.5 /usr/gnu/bin/install -c -m 644 sshd_config.5.out /usr/local/share/man/man5/sshd_config.5 /usr/gnu/bin/install -c -m 644 ssh_config.5.out /usr/local/share/man/man5/ssh_config.5 /usr/gnu/bin/install -c -m 644 sshd.8.out /usr/local/share/man/man8/sshd.8 /usr/gnu/bin/install -c -m 644 sftp.1.out /usr/local/share/man/man1/sftp.1 /usr/gnu/bin/install -c -m 644 sftp-server.8.out /usr/local/share/man/man8/sftp-server.8 /usr/gnu/bin/install -c -m 644 ssh-keysign.8.out /usr/local/share/man/man8/ssh-keysign.8 /usr/gnu/bin/install -c -m 644 ssh-pkcs11-helper.8.out /usr/local/share/man/man8/ssh-pkcs11-helper.8 rm -f /usr/local/bin/slogin ln -s ./ssh /usr/local/bin/slogin rm -f /usr/local/share/man/man1/slogin.1 ln -s ./ssh.1 /usr/local/share/man/man1/slogin.1 if [ ! -d /usr/local/etc ]; then \ ./mkinstalldirs /usr/local/etc; \ fi /usr/local/etc/ssh_config already exists, install will not overwrite /usr/local/etc/sshd_config already exists, install will not overwrite /usr/local/etc/moduli already exists, install will not overwrite /usr/local/etc/ssh_host_key already exists, skipping. /usr/local/etc/ssh_host_dsa_key already exists, skipping. sh: line 14: 23798: Memory fault(coredump) *** Signal 11 - core dumped The following command caused the error: if [ -z "" ] ; then \ if [ -f "/usr/local/etc/ssh_host_key" ] ; then \ echo "/usr/local/etc/ssh_host_key already exists, skipping." ; \ else \ ./ssh-keygen -t rsa1 -f /usr/local/etc/ssh_host_key -N "" ; \ fi ; \ if [ -f /usr/local/etc/ssh_host_dsa_key ] ; then \ echo "/usr/local/etc/ssh_host_dsa_key already exists, skipping." ; \ else \ ./ssh-keygen -t dsa -f /usr/local/etc/ssh_host_dsa_key -N "" ; \ fi ; \ if [ -f /usr/local/etc/ssh_host_rsa_key ] ; then \ echo "/usr/local/etc/ssh_host_rsa_key already exists, skipping." ; \ else \ ./ssh-keygen -t rsa -f /usr/local/etc/ssh_host_rsa_key -N "" ; \ fi ; \ if [ -z "#no ecc#" ] ; then \ if [ -f /usr/local/etc/ssh_host_ecdsa_key ] ; then \ echo "/usr/local/etc/ssh_host_ecdsa_key already exists, skipping." ; \ else \ ./ssh-keygen -t ecdsa -f /usr/local/etc/ssh_host_ecdsa_key -N "" ; \ fi ; \ fi ; \ fi ; make: Fatal error: Command failed for target `host-key' 

PS3. @avp after the next run, make install issued

 (cd openbsd-compat && make) ./mkinstalldirs /usr/local/bin ./mkinstalldirs /usr/local/sbin ./mkinstalldirs /usr/local/share/man ./mkinstalldirs /usr/local/share/man/man1 ./mkinstalldirs /usr/local/share/man/man5 ./mkinstalldirs /usr/local/share/man/man8 ./mkinstalldirs /usr/local/libexec (umask 022 ; ./mkinstalldirs /var/empty) /usr/gnu/bin/install -c -m 0755 -s ssh /usr/local/bin/ssh /usr/gnu/bin/install -c -m 0755 -s scp /usr/local/bin/scp /usr/gnu/bin/install -c -m 0755 -s ssh-add /usr/local/bin/ssh-add /usr/gnu/bin/install -c -m 0755 -s ssh-agent /usr/local/bin/ssh-agent /usr/gnu/bin/install -c -m 0755 -s ssh-keygen /usr/local/bin/ssh-keygen /usr/gnu/bin/install -c -m 0755 -s ssh-keyscan /usr/local/bin/ssh-keyscan /usr/gnu/bin/install -c -m 0755 -s sshd /usr/local/sbin/sshd /usr/gnu/bin/install -c -m 4711 -s ssh-keysign /usr/local/libexec/ssh-keysign /usr/gnu/bin/install -c -m 0755 -s ssh-pkcs11-helper /usr/local/libexec/ssh-pkcs11-helper /usr/gnu/bin/install -c -m 0755 -s sftp /usr/local/bin/sftp /usr/gnu/bin/install -c -m 0755 -s sftp-server /usr/local/libexec/sftp-server /usr/gnu/bin/install -c -m 644 ssh.1.out /usr/local/share/man/man1/ssh.1 /usr/gnu/bin/install -c -m 644 scp.1.out /usr/local/share/man/man1/scp.1 /usr/gnu/bin/install -c -m 644 ssh-add.1.out /usr/local/share/man/man1/ssh-add.1 /usr/gnu/bin/install -c -m 644 ssh-agent.1.out /usr/local/share/man/man1/ssh-agent.1 /usr/gnu/bin/install -c -m 644 ssh-keygen.1.out /usr/local/share/man/man1/ssh-keygen.1 /usr/gnu/bin/install -c -m 644 ssh-keyscan.1.out /usr/local/share/man/man1/ssh-keyscan.1 /usr/gnu/bin/install -c -m 644 moduli.5.out /usr/local/share/man/man5/moduli.5 /usr/gnu/bin/install -c -m 644 sshd_config.5.out /usr/local/share/man/man5/sshd_config.5 /usr/gnu/bin/install -c -m 644 ssh_config.5.out /usr/local/share/man/man5/ssh_config.5 /usr/gnu/bin/install -c -m 644 sshd.8.out /usr/local/share/man/man8/sshd.8 /usr/gnu/bin/install -c -m 644 sftp.1.out /usr/local/share/man/man1/sftp.1 /usr/gnu/bin/install -c -m 644 sftp-server.8.out /usr/local/share/man/man8/sftp-server.8 /usr/gnu/bin/install -c -m 644 ssh-keysign.8.out /usr/local/share/man/man8/ssh-keysign.8 /usr/gnu/bin/install -c -m 644 ssh-pkcs11-helper.8.out /usr/local/share/man/man8/ssh-pkcs11-helper.8 rm -f /usr/local/bin/slogin ln -s ./ssh /usr/local/bin/slogin rm -f /usr/local/share/man/man1/slogin.1 ln -s ./ssh.1 /usr/local/share/man/man1/slogin.1 if [ ! -d /usr/local/etc ]; then \ ./mkinstalldirs /usr/local/etc; \ fi /usr/local/etc/ssh_config already exists, install will not overwrite /usr/local/etc/sshd_config already exists, install will not overwrite /usr/local/etc/moduli already exists, install will not overwrite /usr/local/etc/ssh_host_key already exists, skipping. /usr/local/etc/ssh_host_dsa_key already exists, skipping. /usr/local/etc/ssh_host_rsa_key already exists, skipping. /usr/local/sbin/sshd -t -f /usr/local/etc/sshd_config Privilege separation user sshd does not exist *** Error code 255 (ignored)