I had a broken tablet, disassembled, took out the display. The tablet is Chinese, of unknown manufacturer (in the box I found only instructions for use, there was not a word about the manufacturer in it).
A board is attached to the display on the back side (possibly, an interface or driver). On the display, on the board and on the bus from the display is the code - it starts with AR101H03N- , then at the BL screen, at the PCB , at the FPC bus, and at the end of -V1 .
Also on the back of the display is the code AR101H03N20111110GF .

A photo:

Back of display

Pay:

Board on the back of the display

The connector on the right was used to connect to the main board of the tablet.

Chip driver for the display (it is on the main board of the tablet) - THine 104LT 1HC63LVDM83D
Looks like LVDM - multipoint LVDS
Need to know how to "communicate" with the screen.

Thank you in advance.

  • Contacts in the lower left corner of the board are under the LVDS. Roads go to CN1, it has 40 contacts. Probably there is a 40-pin LVDS. Maybe even some kind of "standard" pinout. - Vladimir Martyanov
  • Thanks for the information. - Mk Km

0