He raised the proxy on 3proxy, kind people from the stack helped, but there was a significant problem related to the fact that the proxy stopped working in just 30-40 seconds. Configs:
Part of the / etc / network / interfaces config (256 proxies in total):
# This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 95.215.111.29 netmask 255.255.255.0 gateway 95.215.111.1 pointopoint 95.215.111.1 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 8.8.8.8 up ip addr add 185.187.198.0/24 dev eth0 down ip addr del 185.187.198.0/24 dev eth0 up ip addr add 185.187.198.1/24 dev eth0 down ip addr del 185.187.198.1/24 dev eth0 up ip addr add 185.187.198.2/24 dev eth0 down ip addr del 185.187.198.2/24 dev eth0 up ip addr add 185.187.198.3/24 dev eth0 down ip addr del 185.187.198.3/24 dev eth0 up ip addr add 185.187.198.4/24 dev eth0 down ip addr del 185.187.198.4/24 dev eth0 up ip addr add 185.187.198.5/24 dev eth0 down ip addr del 185.187.198.5/24 dev eth0 Further part 3proxy.cfg:
pidfile /usr/local/etc/3proxy/3proxy.pid maxconn 10000 nscache 65536 timeouts 1 5 30 60 180 1800 15 60 daemon setgid 65535 setuid 65535 flush proxy -n -a -p8000 -i185.187.198.0 -e185.187.198.0 proxy -n -a -p8001 -i185.187.198.1 -e185.187.198.1 proxy -n -a -p8002 -i185.187.198.2 -e185.187.198.2 proxy -n -a -p8003 -i185.187.198.3 -e185.187.198.3 proxy -n -a -p8004 -i185.187.198.4 -e185.187.198.4 proxy -n -a -p8005 -i185.187.198.5 -e185.187.198.5 proxy -n -a -p8006 -i185.187.198.6 -e185.187.198.6 proxy -n -a -p8007 -i185.187.198.7 -e185.187.198.7 proxy -n -a -p8008 -i185.187.198.8 -e185.187.198.8 proxy -n -a -p8009 -i185.187.198.9 -e185.187.198.9 proxy -n -a -p8010 -i185.187.198.10 -e185.187.198.10 proxy -n -a -p8011 -i185.187.198.11 -e185.187.198.11 proxy -n -a -p8012 -i185.187.198.12 -e185.187.198.12 proxy -n -a -p8013 -i185.187.198.13 -e185.187.198.13 proxy -n -a -p8014 -i185.187.198.14 -e185.187.198.14 proxy -n -a -p8015 -i185.187.198.15 -e185.187.198.15 proxy -n -a -p8016 -i185.187.198.16 -e185.187.198.16 proxy -n -a -p8017 -i185.187.198.17 -e185.187.198.17 proxy -n -a -p8018 -i185.187.198.18 -e185.187.198.18 proxy -n -a -p8019 -i185.187.198.19 -e185.187.198.19 proxy -n -a -p8020 -i185.187.198.20 -e185.187.198.20 Ip a output:
ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:57:95:26 brd ff:ff:ff:ff:ff:ff inet 95.215.111.29 peer 95.215.111.1/32 brd 95.215.111.255 scope global eth0 valid_lft forever preferred_lft forever inet 185.187.198.0/24 scope global eth0 valid_lft forever preferred_lft forever inet 185.187.198.1/24 scope global secondary eth0 valid_lft forever preferred_lft forever inet 185.187.198.2/24 scope global secondary eth0 valid_lft forever preferred_lft forever inet 185.187.198.3/24 scope global secondary eth0 The addresses are on the interface, it looks like the problem is in the proxy server itself, but I don’t know exactly what
