Available equipment:

Eltex LTP-8x выданный IP для примера 192.168.1.2 Cisco 7301 : ip 192.168.1.1 Catalyst 9600 Cisco : ip 192.168.1.3 | идёт замена на SNR-s2985G-24T

How everything is connected tried to portray in the picture.

Since, in fact, a newcomer in this business, before that, was only engaged in small networks, I want to hear how to do everything RIGHT.

And this is what is required. transfer the connection (inbound from the provider) from ELTEX to SNR-s2985G-24T and then wise everything up with the router | ELTEX => the subscribers are currently working and everything is more than satisfactory; for each subscriber, one VLAN with a DHCP address range is allocated as an ELTEX server.

enter image description here what I would like to get on the way out

  • Make a complete network diagram you want to get. Then there will be a subject for conversation. And to think something, having neither the TK, nor the project implementing this TK, on ​​some applications, is at least unwise. - Akina
  • @Akina added image. In essence, you need to replace the Cisco Catalyst 9600 with the SNR-s2985G-24T, which is how it stands now and transfer the incoming connection from the ELTEX to the new SNR, since the Catalist doesn’t have sfp or optics (and leave it alone, because mirrored traffic, at least so said another admin.) - Vladimir H
  • Well, actually, the incoming Inet should connect to the WAN port of the NAT router (who is this in your circuit?), And its LAN port and your local servers / clients to the switch. So, theoretically ... - Akina
  • @Akina I have this very scheme, then that the admin provider from which the inet comes from below on a black background, and it was generally made with a pencil and most likely on the knee. I myself am not strong in working with the iron of this species. Although I understood what he wanted from me (in the connection plan). Just worked before that only hubs and a computer with two network card and build Linux for an inet on 20 - 30 computers. And here such troubles came out and it is necessary to provide a mirror. And the fact that Cisco Catalyst 9600 is standing now does not have an SFP port and it cannot be injected, and that’s what the admin has begun. - Vladimir H

0