Hello,

after adding in IPPManager IP 90 panels, the server, after reboot, began to load for a very long time (15-20 minutes). Through KVM, the download hangs at this point:

enter image description here enter image description here

Content / etc / network / interfaces:

# This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback auto eth0 auto bond0 auto bond0:0 auto bond0:1 auto bond0:2 auto bond0:3 auto bond0:4 auto bond0:5 auto bond0:6 auto bond0:7 auto bond0:8 auto bond0:9 auto bond0:10 auto bond0:11 auto bond0:12 auto bond0:13 auto bond0:14 auto bond0:15 auto bond0:16 auto bond0:17 auto bond0:18 auto bond0:19 auto bond0:20 auto bond0:21 auto bond0:22 auto bond0:23 auto bond0:24 auto bond0:25 auto bond0:26 auto bond0:27 auto bond0:28 auto bond0:29 auto bond0:30 auto bond0:31 auto bond0:32 auto bond0:33 auto bond0:34 auto bond0:35 auto bond0:36 auto bond0:37 auto bond0:38 auto bond0:39 auto bond0:40 auto bond0:41 auto bond0:42 auto bond0:43 auto bond0:44 auto bond0:45 auto bond0:46 auto bond0:47 auto bond0:48 auto bond0:49 auto bond0:50 auto bond0:51 auto bond0:52 auto bond0:53 auto bond0:54 auto bond0:55 auto bond0:56 auto bond0:57 auto bond0:58 auto bond0:59 auto bond0:60 auto bond0:61 auto bond0:62 auto bond0:63 auto bond0:64 auto bond0:65 auto bond0:66 auto bond0:67 auto bond0:68 auto bond0:69 auto bond0:70 auto bond0:71 auto bond0:72 auto bond0:73 auto bond0:74 auto bond0:75 auto bond0:76 auto bond0:77 auto bond0:78 auto bond0:79 auto bond0:80 auto bond0:81 auto bond0:82 auto bond0:83 auto bond0:84 auto bond0:85 auto bond0:86 auto bond0:87 auto bond0:88 auto bond0:89 auto bond0:90 iface eth0 inet static address 79.000.42.57 netmask 255.255.255.0 broadcast 79.000.42.255 gateway 79.000.42.254 iface eth0 inet6 static address 2001:99d0:0403:0239:: netmask 64 dns-nameservers 2001:99d0:3:163::1 post-up sleep 5; /sbin/ip -family inet6 route add 2001:99d0:0403:02ff:ff:ff:ff:ff dev eth0 post-up sleep 5; /sbin/ip -family inet6 route add default via 2001:99d0:0403:02ff:ff:ff:ff:ff pre-down /sbin/ip -family inet6 route del default via 2001:99d0:0403:02ff:ff:ff:ff:ff pre-down /sbin/ip -family inet6 route del 2001:99d0:0403:02ff:ff:ff:ff:ff dev eth0 iface bond0 inet static address ip netmask 255.255.255.0 iface bond0:0 inet static address ip netmask 255.255.255.255 iface bond0:1 inet static address ip netmask 255.255.255.255 iface bond0:2 inet static address ip netmask 255.255.255.255 и так далее 90 IP

System: Debian GNU / Linux 8.9 (jessie) x64

Panel: ISPmanager 5, latest version of stable

Tell me, plz, how can I fix it?

    2 answers 2

    these lines are absolutely not needed:

     auto bond0:0 ... auto bond0:90

    along with these:

     iface bond0:0 inet static address <ip> netmask 255.255.255.255 ... iface bond0:90 inet static address <ip> netmask 255.255.255.255

    after all, we are already living in the twenty-first century, and the linux “crutches” called “network aliases” are not at all required to operate the linux network subsystem.

    all you need to do is add the addresses directly to the interface description:

     iface bond0 inet static address <ip> netmask 255.255.255.0 # добавление адресов: up ip aa <ip-адрес-0>/<маска-0> dev $IFACE ... up ip aa <ip-адрес-90>/<маска-90> dev $IFACE

    these ninety-one lines, by the way, can be put into a separate script:

     iface bond0 inet static address ip netmask 255.255.255.0 # добавление адресов: up /путь/к/вашему/скрипту

    and, as already advised in another answer, auto bond0 better to replace with allow-hotplug bond0

    for details, see man 5 interfaces , man 8 ip and man 8 ip-address .

      Try for interfaces instead of auto use allow-hotplug , with auto system will not boot up, until at least one interface rises, it will wait and, in case of an error, fall. At least in the documentation is so painted. Either as an option, one of the interfaces was renamed if you switched to systemd, and now the system is trying to pick up a nonexistent one. But first, do what you wrote above should help

      • Replaced auto with allow-hotplug, the system booted quickly, but now the panel does not see the attached ip, and there is no ping to them - Alex
      • ru.stackoverflow.com/a/436973/178576 - aleksandr barakin