Windows 7 was buggy, so I decided to clean (inside) the computer, reinstall Windows, if not help, carry it in for repair. What is the essence of the glitch: when the computer is loaded, it is tight, earlier in games textures were lagged, but then it got worse. In general, the installation was finished (with usb), the last stage, and now windows 7 was loaded and wrote:

The computer has unexpectedly rebooted or an unexpected error has occurred.

I shake about.

Installation will continue after a reboot.

But after rebooting again he writes an error, again I press ok, and so on in a circle! In safe mode it hangs on

The program loads services

What to do?

    4 answers 4

    You have a hardware problem, perhaps the memory is junk and, as a result, crashes in the most unexpected places. But there can be any other hardware problem. Remove all extra cards, leave only one memory bar (if there is another 100% working, insert it and remove the rest). If it works, then gradually (one at a time) insert your boards and run the tests each time. So you can identify the culprit glitches.

    Or carry a computer to repair, if you can not identify the problem.

    • Probably, I will carry it in for repair.) I’m friends with a computer ... but it’s going to be a mess. ) - Ivan
    • And why dumb something? Kit mother + percent + memory costs around 5000 rubles, which is not such a huge amount of money. And the rest can be torn off from the old computer. - gecube 2:01 pm

    Try to re-install it first, just take another distribution kit, yours may be broken, check its checksum, try installing it not from a flash drive, but from a disk.

    • When installing from a disk, it says that there is no firewood. And how to install again? After all, if I again put the download of the flash (in the BIOS) 1, then it will give an error and write the pier, press the counter alt case. - Ivan
    • what exactly is writing? what kind of firewood? - tukan
    • There is no firewood. - Ivan
    • oh, how is that no firewood on cd-rom? - tukan
    1. need to write a complete PC configuration. Then we will think.
    2. We take any Linux distribution kit, download it, write it to a disc, and there are stress tests there. For example, memtest86 + for memory. Persecuted in a circle.
    3. If there is an opportunity to switch to the built-in video card by removing the external one, it would be super.
    4. Just in case, you can reset the BIOS settings using the Clear CMOS jumper. I don’t believe in miracles, but you never know ...
      1. Re-install again - it can help.
      2. It did not help - take another Windu from a friend (maybe you have a Wind just a barmaid).
      3. Check Bios.
      4. It did not help - well, there is only repair, I think the problems with the tin ...