I started to study this link, trying to configure, but on the filebeat side the error:

 2018-10-10T17:24:30+03:00 INFO Connecting error publishing events (retrying): Head http://192.168.0.3:4444: EOF 2018-10-10T17:24:30+03:00 INFO send fail

Whereas logstesh are no errors in the logstesh logs. On ports on the side of logstash there are contacts:

 tcp 0 0 0.0.0.0:4444 0.0.0.0:* LISTEN 8758/java tcp 0 0 192.168.0.3:4444 192.168.0.29:47096 TIME_WAIT - tcp 0 0 192.168.0.3:4444 192.168.0.29:47174 TIME_WAIT - tcp 0 0 192.168.0.3:4444 192.168.0.23:40972 TIME_WAIT - tcp 0 0 192.168.0.3:4444 192.168.0.29:47118 TIME_WAIT - tcp 0 0 192.168.0.3:4444 192.168.0.29:47762 TIME_WAIT - tcp 0 0 192.168.0.3:4444 192.168.0.29:47280 TIME_WAIT - tcp 0 0 192.168.0.3:4444 192.168.0.29:47038 TIME_WAIT - tcp 0 0 192.168.0.3:4444 192.168.0.29:47462 TIME_WAIT -

filebeat settings filebeat :

  ############################################################################### ############################# Libbeat Config ################################## # Base config file used by all other beats for using libbeat features ############################# Output ########################################## # Configure what outputs to use when sending the data collected by the beat. # Multiple outputs may be used. output: ### Elasticsearch as output elasticsearch: # Array of hosts to connect to. # Scheme and port can be left out and will be set to the default (http and 9200) # In case you specify and additional path, the scheme is required: http://localhost:9200/path # IPv6 addresses should always be defined as: https://[2001:db8::1]:9200 #hosts: ["localhost:9200"] # Optional protocol and basic auth credentials. #protocol: "https" #username: "admin" #password: "s3cr3t" # Number of workers per Elasticsearch host. #worker: 1 # Optional index name. The default is "filebeat" and generates # [filebeat-]YYYY.MM.DD keys. #index: "filebeat" # A template is used to set the mapping in Elasticsearch # By default template loading is disabled and no template is loaded. # These settings can be adjusted to load your own template or overwrite existing ones #template: # Template name. By default the template name is filebeat. #name: "filebeat" # Path to template file #path: "filebeat.template.json" # Overwrite existing template #overwrite: false # Optional HTTP Path #path: "/elasticsearch" # Proxy server url #proxy_url: http://proxy:3128 # The number of times a particular Elasticsearch index operation is attempted. If # the indexing operation doesn't succeed after this many retries, the events are # dropped. The default is 3. #max_retries: 3 # The maximum number of events to bulk in a single Elasticsearch bulk API index request. # The default is 50. #bulk_max_size: 50 # Configure http request timeout before failing an request to Elasticsearch. #timeout: 90 # The number of seconds to wait for new events between two bulk API index requests. # If `bulk_max_size` is reached before this interval expires, addition bulk index # requests are made. #flush_interval: 1 # Boolean that sets if the topology is kept in Elasticsearch. The default is # false. This option makes sense only for Packetbeat. #save_topology: false # The time to live in seconds for the topology information that is stored in # Elasticsearch. The default is 15 seconds. #topology_expire: 15 # tls configuration. By default is off. #tls: # List of root certificates for HTTPS server verifications #certificate_authorities: ["/etc/pki/root/ca.pem"] # Certificate for TLS client authentication #certificate: "/etc/pki/client/cert.pem" # Client Certificate Key #certificate_key: "/etc/pki/client/cert.key" # Controls whether the client verifies server certificates and host name. # If insecure is set to true, all server host names and certificates will be # accepted. In this mode TLS based connections are susceptible to # man-in-the-middle attacks. Use only for testing. #insecure: true # Configure cipher suites to be used for TLS connections #cipher_suites: [] # Configure curve types for ECDHE based cipher suites #curve_types: [] # Configure minimum TLS version allowed for connection to logstash #min_version: 1.0 # Configure maximum TLS version allowed for connection to logstash #max_version: 1.2 ### Logstash as output #logstash: # The Logstash hosts hosts: ["192.168.0.3:4444"] # Number of workers per Logstash host. #worker: 1 # The maximum number of events to bulk into a single batch window. The # default is 2048. bulk_max_size: 2048 # Set gzip compression level. #compression_level: 3 # Optional load balance the events between the Logstash hosts #loadbalance: true # Optional index name. The default index name depends on the each beat. # For Packetbeat, the default is set to packetbeat, for Topbeat # top topbeat and for Filebeat to filebeat. #index: filebeat # Optional TLS. By default is off. #tls: # List of root certificates for HTTPS server verifications #certificate_authorities: ["/etc/pki/root/ca.pem"] # Certificate for TLS client authentication #certificate: "/etc/pki/client/cert.pem" # Client Certificate Key #certificate_key: "/etc/pki/client/cert.key" # Controls whether the client verifies server certificates and host name. # If insecure is set to true, all server host names and certificates will be # accepted. In this mode TLS based connections are susceptible to # man-in-the-middle attacks. Use only for testing. #insecure: true # Configure cipher suites to be used for TLS connections #cipher_suites: [] # Configure curve types for ECDHE based cipher suites #curve_types: [] ### File as output file: # Path to the directory where to save the generated files. The option is mandatory. path: "/tmp/filebeat" # Name of the generated files. The default is `filebeat` and it generates files: `filebeat`, `filebeat.1`, `filebeat.2`, etc. filename: filebeat # Maximum size in kilobytes of each file. When this size is reached, the files are # rotated. The default value is 10 MB. #rotate_every_kb: 10000 # Maximum number of files under path. When this number of files is reached, the # oldest file is deleted and the rest are shifted from last to first. The default # is 7 files. #number_of_files: 7 ### Console output # console: # Pretty print json event #pretty: false ############################# Shipper ######################################### shipper: # The name of the shipper that publishes the network data. It can be used to group # all the transactions sent by a single shipper in the web interface. # If this options is not defined, the hostname is used. #name: # The tags of the shipper are included in their own field with each # transaction published. Tags make it easy to group servers by different # logical properties. #tags: ["service-X", "web-tier"] # Uncomment the following if you want to ignore transactions created # by the server on which the shipper is installed. This option is useful # to remove duplicates if shippers are installed on multiple servers. #ignore_outgoing: true # How often (in seconds) shippers are publishing their IPs to the topology map. # The default is 10 seconds. #refresh_topology_freq: 10 # Expiration time (in seconds) of the IPs published by a shipper to the topology map. # All the IPs will be deleted afterwards. Note, that the value must be higher than # refresh_topology_freq. The default is 15 seconds. #topology_expire: 15 # Internal queue size for single events in processing pipeline #queue_size: 1000 # Configure local GeoIP database support. # If no paths are not configured geoip is disabled. #geoip: #paths: # - "/usr/share/GeoIP/GeoLiteCity.dat" # - "/usr/local/var/GeoIP/GeoLiteCity.dat" ############################# Logging ######################################### # There are three options for the log ouput: syslog, file, stderr. # Under Windos systems, the log files are per default sent to the file output, # under all other system per default to syslog. logging: # Send all logging output to syslog. On Windows default is false, otherwise # default is true. #to_syslog: true # Write all logging output to files. Beats automatically rotate files if rotateeverybytes # limit is reached. to_files: true # To enable logging to files, to_files option has to be set to true files: # The directory where the log files will written to. path: /var/log # The name of the files where the logs are written to. name: mybeat # Configure log file size limit. If limit is reached, log file will be # automatically rotated rotateeverybytes: 10485760 # = 10MB # Number of rotated log files to keep. Oldest files will be deleted first. #keepfiles: 7 # Enable debug output for selected components. To enable all selectors use ["*"] # Other available selectors are beat, publish, service # Multiple selectors can be chained. #selectors: [ ] # Sets log level. The default log level is error. # Available log levels are: critical, error, warning, info, debug level: info

0.29 This is just a filebeat client. I have already broken my whole head, I can’t understand what the problem is and where to dig, I tried different ports, but without success. I set up for CentOS7, the firewall is disabled, seelinux is the same.

    0